|
 |
| This function returns the frame to the design reference point during embroidering. |
|
|
|
 |
| This function advances and reverses just the needle bar without actual embroidering with the frame set to 1 needle, 100 needles, 1,000 needles and 10,000 needles, and in color code. |
|
|
|
 |
| This function reverses the frame by 1~10 needle(s) when thread is deviated or cut. |
|
|
|
 |
| This device is automatically operated according to design code and setting and improves both productivity and the quality of end-product. |
|
|
|
 |
| Whenever upper thread is cut or lower thread is absent, this function senses it and automatically stops the machine. |
|
|
|
 |
| This function automatically and exactly moves the frame to the embroidery stop point at power failure and reduces defect of end-product. |
|
|
|
 |
| The control panel includes an internal 3.53 floppy drive to help you transport designs to the embroidery machine quickly. 3.53 drive is compatible with both 2DD and 2HD disks. |
|
|
|
 |
| This function may delete, modify and insert stitch data and function code(jump, end, thread cutting) for the design. |
|
|
|
 |
|
|
|
 |
|
|
|
 |
| This function enables individual setting at high, middle and low speed. |
|
|
|
 |
|
|
|
 |
|
|
|
 |
| This function automatically senses designs in various formats that are saved in USB memory, CF Card, and floppy disk. |
|
|
|
 |
| It enters, deletes and outputs designs through USB memory stick. |
|
|
|
 |
| Select the Frame Center Move button, and it automatically finds the reference point and moves to the Frame Center. |
|
|
|
 |
| When the desired frame(SQURE, SRF) is selected from the menu, a random frame limit suitted to the outline of the frame is set in order to prevent a failure by causing an error before the needle interferes with the frame at embroidering. |
| |
